You may also like…
-
Step 1-Add to QuoteMORE INFOHDMI Cable 100Ft
HDMI Cable
100 Ft in length
Has an amplifier for signal boost
(Black)Note:
100 Ft of VGA cable is $35.00.100ft HDMI cable doesnt work very well. So to transmit HDMI signal, you will need the following equipment:1. HDMI to SDI converter ($95.00)2. SDI to HDMI converter ($95.00)3. Two HDMI cables ($5.00 each). short lengths4. One 100ft HD-SDI cable ($35.00).Unless there is a compelling reason that you want to stick with HDMI for a longer distance (100ft or more) then you can spend over $200.00 for it.And if your signal is a standard signal there is no need to go with the above configuration. HDMI is stable for upto 40 ft of length. -
Step 1-Add to QuoteMORE INFO
Sony AWS-G500HD Anycast Station
Anycast is a device to switch multiple video sources inputs by using different types of cards. It can also mix “mixed audio” and “embedded audio” and switch them around different inputs. It comes with plenty of different fades and cross fades to switch between the sources. If you are doing a live multiple camera production, this switcher can be used to create powerfull content. As seen in the picture below, it consists of:
1. A video switcher
2. An audio mixer
3. A large builtin display monitor.
4. Streaming encoder and a server.
Related products
-
Step 1-Add to QuoteMORE INFO
Sanyo PDG-DHT8000L
Resolution: 1920×1080, HD
Owner’s Manual
Brightness: 8000 Lumens
Contrast Ratio: 7500:1
Aspect Ratio: 16:9
Inputs: DVI-D x 1 (HDCP)
HDMI x 1(v1.3 with Deep Color)
D-sub 15 x 1 (RGB, Scart RGB)
5BNC x1 (G B R H/V V) (Video/Y Pb/Cb Pr/Cr)
Mini DIN 4pin x 1 (S-Video)
Outputs: D-sub 15 x 1 -
Step 1-Add to QuoteMORE INFO
10000 Lumens Projector Rental
LX100 steps up both brightness and performance levels of the RoadRunner series with an amazing 10000 ANSI lumens and a quad-lamp engine mode. New 3D digital processing for sharp video images from analog and digital sources, 90% brightness uniformity, and a 1100:1 contrast ratio create bright, beautifully realistic images. The new Fast Lens Change (FLC™) mount is designed for no-fuss lens changes and easy set-up.
between 3:00 pm-6:00 pm on Friday
before11:00 AM on Monday.
- We will deliver & setup.
- You can go through the setup process with technician.
- We will pickup the equipment next day or at the designated time per your invoice.
- Cost varies depending on the type of the setup.
