Eiki AH-43002W Rental

Wide Angle Lens For 8000 Lumen

Eiki AH-43002W Rental

Works With EIP-HDT30, EIPSXG20, Sanyo PDG-DHT8000L
Fixed lens 0.8:1 (On Axis Lens)

Category: Uncategorized

Share With A Friend:

Description

Description

The LNS-W52 (Eiki AH-43002W) is an on-axis lens. This means the lens is designed to be put at the center of the screen both horizontally and vertically:

Mounting it in front without using keystone typically won’t work because the projector would be in the audience’s line of sight.

You may also like…

Sanyo PDG-DHT8000L

Resolution: 1920×1080, HD
Brightness: 8000 Lumens
Contrast Ratio: 7500:1
Aspect Ratio: 16:9
Inputs: DVI-D x 1 (HDCP)
HDMI x 1(v1.3 with Deep Color)
D-sub 15 x 1 (RGB, Scart RGB)
5BNC x1 (G B R H/V V) (Video/Y Pb/Cb Pr/Cr)
Mini DIN 4pin x 1 (S-Video)
Outputs: D-sub 15 x 1

Manual
Owner’s Manual

Step 1-Add to Quote MORE INFO

Pickup
between 3:00 pm-6:00 pm on Friday

Drop off
before11:00 AM on Monday.

Rental Options:

Either customer picks up or we deliver to the customer -local delivery only.

We will deliver & setup.
You can go through the setup process with technician.
We will pickup the equipment next day or at the designated time per your invoice.
Cost varies depending on the type of the setup.

We will deliver & setup. Technician will stay & run the equipment. Once done, he will strike & bring back the equipment.

TOP

Brightness:	5200
Contrast::	2500:1
Weight:	35.7 lbs
Technology:	DLP
Native Resolution:	1024×768
Supported Resolution:	upto SXGA
Built in Speakers:	10 watt
Lens:	NP09ZL

SPECIFICATIONS	WL50 Measured with test circuit (see User Guide)	WL50-LO Measured with test circuit (see User Guide)	MC50 Measured with RPM626 Preamplifier	WL51 Measured with test circuit (see User Guide)	MC51 Measured with RPM626 Preamplifier
Condenser (electret bias)	Condenser (electret bias)	Condenser (electret bias)	Condenser (electret bias)	Condenser (electret bias)	Condenser (electret bias)
Polar Pattern	Omnidirectional	Omnidirectional	Omnidirectional	Cardioid	Cardioid
Output Impedance	N/A	N/A	136 ohms actual (rated at 150 ohms)	N/A	136 ohms actual (rated at 150 ohms)
Recommended Min. Input Impedance	20 kilohms	20 kilohms	N/A	20 kilohms	N/A
Output Level	�45.0 dBV/Pa (1 Pa=94 dB SPL)	�54.0 dBV/Pa (1 Pa=94 dB SPL)	�41.0 dBV/Pa (1 Pa=94 dB SPL)	�50.0 dBV/Pa (1 Pa=94 dB SPL)	�46.0 dBV/Pa (1 Pa=94 dB SPL)
Maximum SPL	133 dB at 1% THD/ 20 kilohm load	142 dB at 1% THD/ 20 kilohm load	138 dB at 1% THD/ 1 kilohm load	138 dB at 1% THD/ 20 kilohm load	143 dB at 1% THD/1 kilohm load
Frequency Response	20 to 20,000 Hz	20 to 20,000 Hz	20 to 20,000 Hz	20 to 20,000 Hz	20 to 20,000 Hz
Dynamic Range	103.0 dB	103.0 dB	108.0 dB	103.0 dB	108.0 dB
Output Noise (equivalent SPL, A-weighted)	30 dB typical; 33 dB maximum	39 dB typical; 42 dB maximum	30 dB typical; 33 dB maximum	35 dB typical; 38 dB maximum	35 dB typical; 38 dB maximum
Signal-to-Noise Ratio	64 dB at 94 dB SPL	55 dB at 94 dB SPL	64 dB at 94 dB SPL	59 dB at 94 dB SPL	59 dB at 94 dB SPL
Power Requirements	+5 Vdc on pin 2, return on pin 1 (ground).	+5 Vdc on pin 2, return on pin 1 (ground).	11 to 52 Vdc (positive on pins 2 and 3, return on pin 1).	+5 Vdc on pin 2, return on pin 1 (ground).	11 to 52 Vdc (positive on pins 2 and 3, return on pin 1).
Current Drain	60�130 µA	60�130 µA	4.6 mA	60�130 µA	4.6 mA
Polarity�Positive pressure on the diaphragm produces a positive voltage at:	Pin 3 relative to pin 1 at the output connector of the microphone.		pin 2 relative to pin 3 of the output connector of preamplifier.	pin 3 relative to pin 1 at the output connector of the microphone.	pin 2 relative to pin 3 of the output connector of preamplifier.
Overvoltage Protection	N/A	N/A	+/- 75.0 Vdc maximum from pins 2 and 3 to pin 1.	N/A	+/- 75.0 Vdc maximum from pins 2 and 3 to pin 1.
Cap and Overmold Material	Polypropylene
Environmental Conditions	Operating Temperatures: �18 to 57 degrees C (0 to 135 degrees F) Storage Temperatures: �29 to 74 degrees C (�20 to 165 degrees F) Humidity: 0 to 95%
Packaged Weight	188 g (6.63 oz.)	188 g (6.63 oz.)	305 g (10.76 oz.)	188 g (6.63 oz.)	305 g (10.76 oz.)
Cable and Connector	1.5 m (5 ft.), small-diameter, shielded, with miniature female 4-pin connector (TA4F type). WL50X: 3 m (10 ft.) small-diameter, shielded, with stripped and tinned leads.	1.5 m (5 ft.), small-diameter, shielded, with miniature female 4-pin connector (TA4F type). WL50X�LO: 3 m (10 ft.) small-diameter, shielded, with stripped and tinned leads.	1.5 m (5 ft.), small-diameter, shielded, with miniature female 4-pin connector (TA4F type).	1.5 m (5 ft.), small-diameter, shielded, with miniature female 4-pin connector (TA4F type). WL50X: 3 m (10 ft.) small-diameter, shielded, with stripped and tinned leads.	1.5 m (5 ft.), small-diameter, shielded, with miniature female 4-pin connector (TA4F type).
Microphone and Preamp Dimensions	See User Guide
Net Weight	WL50: 21 g (0.7 oz.) with cable and connector. WL50X: 28 g (1.0 oz.) with 3 m (10 ft.) stripped and tinned cable.	WL50�LO: 21 g (0.7 oz.) with cable and connector. WL50X�LO: 28 g (1.0 oz.) with 3 m (10 ft.) stripped and tinned cable.	121 g (4.3 oz.) with cable, connector, and preamplifier.	WL51 21 g (0.7 oz.) with cable and connector. WL51X: 28 g (1.0 oz.) with 3 m (10 ft.) stripped and tinned cable.	121 g (4.3 oz.) with cable, connector, and preamplifier.