7000 Watts Generator Rental
- Quiter Operation 60 db.
- Run Time (with one full tank): 6.5 hrs. at rated load – 18 hrs. with 25% of rated load.
- Noise level 60 db.
- Out Put (AC): 120/240 Volts 7000 Watts Max (58.3/29.1A)
- Starting Mechanism: Recoil and electric
- Full tank: 5.1 Gallons
- Weighs 261 lbs.
- Gas Powered.
- Size: 33.5 x 27.6 x 28.5 (inches)
Share With A Friend:
You may also like…
-
Step 1-Add to QuoteMORE INFO120 KW Generator Rental
- Weight: 4725 lbs.
- Dimensions: 110 x 45 x 64.5
- Trailer Coupling Type: Pintle
- Output (Standby): 106 KW
- Output (prime): 96 KW
- Engine Motor: Liquid Cool, 4 Cylinder
- Circuit Breaker 350 A
- Current 3 Phase (prime): 289/145
- Current 1 Phase (Prime): 120/240
Related products
-
Step 1-Add to QuoteMORE INFO
WL-50B Microphone Rental
SPECIFICATIONS WL50
Measured with test circuit (see User Guide)WL50-LO
Measured with test circuit (see User Guide)MC50
Measured with RPM626 PreamplifierWL51
Measured with test circuit (see User Guide)MC51
Measured with RPM626 PreamplifierCondenser (electret bias) Condenser (electret bias) Condenser (electret bias) Condenser (electret bias) Condenser (electret bias) Condenser (electret bias) Polar Pattern Omnidirectional Omnidirectional Omnidirectional Cardioid Cardioid Output Impedance N/A N/A 136 ohms actual (rated at 150 ohms) N/A 136 ohms actual (rated at 150 ohms) Recommended Min.
Input Impedance20 kilohms 20 kilohms N/A 20 kilohms N/A Output Level �45.0 dBV/Pa
(1 Pa=94 dB SPL)�54.0 dBV/Pa
(1 Pa=94 dB SPL)�41.0 dBV/Pa
(1 Pa=94 dB SPL)�50.0 dBV/Pa
(1 Pa=94 dB SPL)�46.0 dBV/Pa
(1 Pa=94 dB SPL)Maximum SPL 133 dB at 1% THD/
20 kilohm load142 dB at 1% THD/
20 kilohm load138 dB at 1% THD/
1 kilohm load138 dB at 1% THD/
20 kilohm load143 dB at 1% THD/1 kilohm load Frequency Response 20 to 20,000 Hz 20 to 20,000 Hz 20 to 20,000 Hz 20 to 20,000 Hz 20 to 20,000 Hz Dynamic Range 103.0 dB 103.0 dB 108.0 dB 103.0 dB 108.0 dB Output Noise
(equivalent SPL, A-weighted)30 dB typical; 33 dB maximum 39 dB typical; 42 dB maximum 30 dB typical; 33 dB maximum 35 dB typical; 38 dB maximum 35 dB typical; 38 dB maximum Signal-to-Noise Ratio 64 dB at 94 dB SPL 55 dB at 94 dB SPL 64 dB at 94 dB SPL 59 dB at 94 dB SPL 59 dB at 94 dB SPL Power Requirements +5 Vdc on pin 2, return on pin 1 (ground). +5 Vdc on pin 2, return on pin 1 (ground). 11 to 52 Vdc (positive on pins 2 and 3, return on pin 1). +5 Vdc on pin 2, return on pin 1 (ground). 11 to 52 Vdc (positive on pins 2 and 3, return on pin 1). Current Drain 60�130 µA 60�130 µA 4.6 mA 60�130 µA 4.6 mA Polarity�Positive pressure on
the diaphragm produces a
positive voltage at:Pin 3 relative to pin 1 at the output connector of the microphone. pin 2 relative to pin 3 of the output
connector of preamplifier.pin 3 relative to pin 1 at the
output connector of the
microphone.pin 2 relative to pin 3 of the output
connector of preamplifier.Overvoltage Protection N/A N/A +/- 75.0 Vdc maximum from pins
2 and 3 to pin 1.N/A +/- 75.0 Vdc maximum from pins
2 and 3 to pin 1.Cap and Overmold Material Polypropylene Environmental Conditions Operating Temperatures: �18 to 57 degrees C (0 to 135 degrees F)
Storage Temperatures: �29 to 74 degrees C (�20 to 165 degrees F)
Humidity: 0 to 95%Packaged Weight 188 g (6.63 oz.) 188 g (6.63 oz.) 305 g (10.76 oz.) 188 g (6.63 oz.) 305 g (10.76 oz.) Cable and Connector 1.5 m (5 ft.), small-diameter,
shielded, with miniature female
4-pin connector (TA4F type).
WL50X: 3 m (10 ft.)
small-diameter, shielded, with
stripped and tinned leads.1.5 m (5 ft.), small-diameter,
shielded, with miniature female
4-pin connector (TA4F type).
WL50X�LO: 3 m (10 ft.)
small-diameter, shielded, with
stripped and tinned leads.1.5 m (5 ft.), small-diameter,
shielded, with miniature female
4-pin connector (TA4F type).1.5 m (5 ft.), small-diameter,
shielded, with miniature female
4-pin connector (TA4F type).
WL50X: 3 m (10 ft.)
small-diameter, shielded, with
stripped and tinned leads.1.5 m (5 ft.), small-diameter,
shielded, with miniature female
4-pin connector (TA4F type).Microphone and Preamp
DimensionsSee User Guide Net Weight WL50: 21 g (0.7 oz.) with cable
and connector.
WL50X: 28 g (1.0 oz.) with 3 m
(10 ft.) stripped and tinned
cable.WL50�LO: 21 g (0.7 oz.) with
cable and connector.
WL50X�LO: 28 g (1.0 oz.) with
3 m (10 ft.) stripped and tinned
cable.121 g (4.3 oz.) with cable,
connector, and preamplifier.WL51 21 g (0.7 oz.) with cable
and connector. WL51X: 28 g
(1.0 oz.) with 3 m (10 ft.)
stripped and tinned cable.121 g (4.3 oz.) with cable,
connector, and preamplifier. -
Step 1-Add to QuoteMORE INFO
Elmo Document Camera P-100
- 30 frames per second image capture – smooth natural movement
- 1,300,000 pixels, SXGA (1280×1024) native resolution, 800 HV lines industry standard
- HDTV 1280×720 dot output – no oblong display, even with 16:9 TV monitors
- Quick Setup – one action, fast and easy
- Ultra functional design – smooth operation
- Integrated LCD monitor – fast positioning
- Max clarity 64x zoom (16x optical, 4xdigital1)
- Exclusive lens minimizes distortion
- USB connection to PC supports instant drawing to highlight and annotate image
- Built-in SD Card slot allows stored image slide shows, and split image (9 &16 split), without PC
- Split display – live and stored images on PC
- Flexible camera and light arms – show parts or side views of any 3D object on stage
- Clear text mode – accentuates black and white contrast for excellent readable text
- Progressive Scan eliminates flicker and blur
[wpdm_file id=12 title=”true” ]
-
Step 1-Add to QuoteMORE INFO
3M Transparency Projector
- An articulating head maintains crisp images on the screen and the external color-tuning dial provides edge-to-edge brightness.
- 3M standard overhead projectors produce high-quality images from color and monochrome transparencies.
- perfect solution for schools, government and businesses
- Simple to use, one switch turns the projector on and off.
between 3:00 pm-6:00 pm on Friday
before11:00 AM on Monday.
Either customer picks up or we deliver to the customer -local delivery only.
- We will deliver & setup.
- You can go through the setup process with technician.
- We will pickup the equipment next day or at the designated time per your invoice.
- Cost varies depending on the type of the setup.
We will deliver & setup. Technician will stay & run the equipment. Once done, he will strike & bring back the equipment.
