You may also like…
-
Step 1-Add to QuoteMORE INFOAllen and Heath ZED428
- 24 mono inputs plus 2 dual stereo channels, 4-Bus
- 4-band EQ with 2 swept mids and in/out switch
- 6 auxiliary sends (2 pre, 2 post, 2 pre/post)
- 4 sub groups fed from each channel
- L, R and M main mix outputs
- Individual channel 48V phantom power
- Direct output on every mono channel
- 2 dual stereo inputs with 4-band EQ
- Peak and signal indication on every channel
- 2 matrix sections available; can send output to USB
- Configurable USB stereo audio in/out
- Master level controls on all outputs
- Easy to use layout � all connections and controls on top surface
-
Step 1-Add to QuoteMORE INFO
Yamaha 16 channel Mixer
- 24 input channels, including 16 built-in analog inputs (with +48V phantom powering on 12 channels),
- 8 optional digital inputs (ADAT, TASCAM, AES/EBU formats available)
- Digital I/O expansion slot for optional multitrack recorder interface card (ADAT, TASCAM, AES/EBU format options)
- Coaxial-type digital stereo input and output
- Balanced XLR-type stereo outputs
- 4-band parametric equalization on all main input and output mixing channels
- 2-band EQ on secondary input channels
Yamaha 16 channel Mixer Manual
Related products
-
Step 1-Add to QuoteMORE INFO
Boundary Mic Rental
Used on conference tables, stage floors, and lecterns. Its high sensitivity and wide frequency range make it especially suitable for picking up speech and vocals in sound reinforcement and recording applications. Interchangeable cartridges provide the installer with greater flexibility and make it possible to easily reconfigure microphone coverage as the need arises. Includes an internal pre amplifier. Includes a programmable membrane on/off indicator LED, and a miniature, four pin connector.
Features
- Flat frequency response across the vocal range for uncolored sound
- Interchangeable cardioid, super cardioid, and omnidirectional cartridges that provide choices for applications
- Sleek, low-profile design for unobtrusive appearance
- Balanced transformer-less output for increased immunity to noise over long cable runs
- Low susceptibility to electromagnetic hum and RFI
- Programmable on/off switch and LED on/off indicator
Specifications
- Frequency Response: 50Hz to 17kHz
- Polar Pattern: Omnidirectional
- Output Impedance: 150 ohms
- Sensitivity: -22.0 dBV/Pa
- Maximum SPL: 111.5 dB
- Signal to Noise Ratio: 76.5 dB
- Dynamic Range: 94.0 dB
- Power Requirements: 11 to 52 Vdc phantom; 2.0 mA current consumption
between 3:00 pm-6:00 pm on Friday
before11:00 AM on Monday.
Either customer picks up or we deliver to the customer -local delivery only.
- We will deliver & setup.
- You can go through the setup process with technician.
- We will pickup the equipment next day or at the designated time per your invoice.
- Cost varies depending on the type of the setup.
We will deliver & setup. Technician will stay & run the equipment. Once done, he will strike & bring back the equipment.
